Panasonic Residential Technical Training
Split Installation
This training course provides the participants with an overview of Panasonic's R-410a one-to-one split and Flexi Multi products including installation requirements, commissioning procedures, operating characteristics and a general overview of service and troubleshooting procedures.
Click on the link at the time and date of the Webinar to enter the session:
- January 17, Tuesday, 3:30-5:00 PM EST
- February 14, Tuesday, 3:30-5:00 PM EST
- March 13, Tuesday, 3:30-5:00 PM EST
- April 17, Tuesday, 3:30-5:00 PM EST
- May 15, Tuesday, 3:30-5:00 PM EST
- June 19, Tuesday, 3:30-5:00 PM EST
- July 17, Tuesday, 3:30-5:00 PM EST
- August 14, Tuesday, 3:30-5:00 PM EST
- September 18, Tuesday, 3:30-5:00 PM EST
- October 16, Tuesday, 3:30-5:00 PM EST
- November 13, Tuesday, 3:30-5:00 PM EST
- December 18, Tuesday, 3:30-5:00 PM EST
ECO-i Installation
This training course provides an introduction to the product (including models, capacities, voltages, etc.), working with R410a refrigerant, and installation requirements and procedures. These include, but are not limited to: brazing of refrigerant lines/need for nitrogen purge, selection and installation of refrigerant piping, evacuation requirements, refrigerant charging calculations and methodology, installation and supporting of indoor and outdoor units, installation/interfacing of accessory items, required installation clearances, power wiring requirements, and control wiring requirements.
Click on the link at the time and date of the Webinar to enter the session:
- January 5, Thursday, 3:30-5:00 PM EST
- February 2, Thursday, 3:30-5:00 PM EST
- March 1, Thursday, 3:30-5:00 PM EST
- April 5, Thursday, 3:30-5:00 PM EST
- May 3, Thursday, 3:30-5:00 PM EST
- June 7, Thursday, 3:30-5:00 PM EST
- July 5, Thursday, 3:30-5:00 PM EST
- August 2, Thursday, 3:30-5:00 PM EST
- September 16, Thursday, 3:30-5:00 PM EST
- October 4, Thursday, 3:30-5:00 PM EST
- November 1, Thursday, 3:30-5:00 PM EST
- December 6, Thursday, 3:30-5:00 PM EST
ECO-i Commissioning
This training course includes an introduction of product (including models, capacities, voltages, etc.), what to check before start up, how to set dip switches, what to check after starting unit, refrigerant charging calculations and methodology, checking installation of indoor and outdoor units, power wiring requirements 12 hr before start up, and control wiring requirements.
Click on the link at the time and date of the Webinar to enter the session:
- January 25, Wednesday, 3:30-5:00 PM EST
- February 21, Tuesday, 3:30-5:00 PM EST
- March 20, Tuesday, 3:30-5:00 PM EST
- April 24, Tuesday, 3:30-5:00 PM EST
- May 22, Thursday, 3:30-5:00 PM EST
- June 26, Wednesday, 3:30-5:00 PM EST
- July 24, Tuesday, 3:30-5:00 PM EST
- August 21, Tuesday, 3:30-5:00 PM EST
- September 25, Tuesday, 3:30-5:00 PM EST
- October 23, Tuesday, 3:30-5:00 PM EST
- November 27, Tuesday, 3:30-5:00 PM EST
- December 19, Wednesday, 3:30-5:00 PM EST
ECO-i Service
This training course provides an introduction to the proper techniques for troubleshooting the Panasonic Eco-i VRF systems. This is to include an introduction to inverter driven VRF systems, indoor/outdoor electronic component identification, general refrigerant flow (superheat/sub-cooling) and indoor unit EEV operation. Also, covered is how to locate and interpret the various error codes associated with these systems.
Click on the link at the time and date of the Webinar to enter the session:
- January 19, Thursday, 3:30-5:00 PM EST
- February 23, Thursday, 3:30-5:00 PM EST
- March 22, Thursday, 3:30-5:00 PM EST
- April 26, Thursday, 3:30-5:00 PM EST
- May 24, Thursday, 3:30-5:00 PM EST
- June 28, Thursday, 3:30-5:00 PM EST
- July 26, Thursday, 3:30-5:00 PM EST
- August 23, Thursday, :30-5:00 PM EST
- September 27, Thursday, 3:30-5:00 PM EST
- October 25, Thursday, 3:30-5:00 PM EST
- November 29, Thursday, 3:30-5:00 PM EST
- December 20, Thursday, 3:30-5:00 PM EST
System Requirements
PC-based attendees:
Required: Windows® 2000, XP Home, XP Pro, 2003 Server, Vista
Macintosh®-based attendees:
Required: Mac OS® X 10.4 (Tiger®) or newer